Furniture Kit for 2327 SQ model kilns
This is high alumina kiln furniture rated to cone 11.
Three 21x21x3/4″ square shelves
Two 21×10-1/2×3/4″ shelves
Three each 1″, 2″, 6″ and 8″ posts.
Six each 4″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.
Related Products
This is high alumina kiln furniture rated to cone 11.
Three 21x21x3/4″ square shelves
Two 21×10-1/2×3/4″ shelves
Three each 1″, 2″, 6″ and 8″ posts.
Six each 4″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.
High alumina kiln furniture rated to cone 11.
Three 15.5″ dia. full shelf
One 15.5″ dia. half shelves
Three each of 1″, 2″,4″,and 6″ posts.
All posts are 1 3/4″ square
Two kgs. kiln wash
Kiln Wash is used to protect kiln shelves from glaze drips and pottery from sticking to the shelves.
It comes as a powder which you mix with water to a milky consistancy.Apply it to the top side of kiln shelves with a brush.
It is better to apply several thin layers than one thick layer.
Please do not apply kiln wash to the bricks of your kiln.
If you require kiln wash for glass slumping please specify.
These kiln posts are rated up to cone 11 in oxidation or reduction atmospheres.
We suggest using three posts per shelf for stability.
Always try to stack each layer of posts directly above each other so that the weight of all shelves rests on the kiln floor and not on the shelf below.
These posts are all 1 3/4″ X 1 3/4″ square and are available in the following sizes;
1/2″
1″
2″
3″
4″
5″
6″
8″
10″
12″
This is high alumina kiln furniture rated to cone 11.
Two 21″ diameter half shelves.
Three 21″ diameter full shelves.
Three each 1″, 2″, 6″ and 8 posts.
Six each 4″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.
This is high alumina kiln furniture rated to cone 11.
Eight 26″ diameter half shelves
Six each 1″,2″,4″,6″, and 8″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.