Kiln Fume Vents

Showing all 3 results

The Orton Vent Master vents the fumes directly from the kiln before they exit the kiln into the room.

This is a very effective venting system which we highly recommend with every kiln.

All Vent masters include the main blower and motor ,one three foot high temperature hose,one fume collector cup,hose clamps,instructions and test firing cones.

The collector cup attaches to the side of the kiln.

The motor can be left on the floor or attached to the wall.

This kit allows for another kiln to be vented to the same VentMaster Blower, at a fraction of the cost of a new vent. The kit includes one additional collector cup, one three foot high-temperature hose, and two hose clamps.

This kit extends the distance between the blower motor and the collector cup. The kit includes 1 additional three foot high-temperature hose, a hose coupler, and two hose clamps. This kit is excellent for mounting the vent higher on a wall or further away from the kiln. (Maximum recommended length between collector cup and motor blower is 25 feet)

Showing all 3 results