Cart

Top Rated

This is the knob which goes on the infinite switch on kilns without a bartlett controller

Overview

  • 16.5 cubic feet
  • 240 or 208 Volts
  • 80 or 90 amp breaker required
  • Sectional design
  • 3 Zone Bartlett Controller at NO EXTRA CHARGE
  • Patented lid lifter at NO EXTRA CHARGE
  • Double wall construction

This is high alumina kiln furniture rated to cone 11.

Three 21x21x3/4″ square shelves

Two 21×10-1/2×3/4″ shelves

Three each 1″, 2″, 6″ and 8″ posts.

Six each 4″ posts.

All posts are 1 3/4″ square.

Two kilograms kiln wash.

 

 

 

Specify voltage when ordering.Relays are available in12 volt,208 volt or 240 volt.
The most common relay on a kiln with an electronic controller is the 12 volt version.Please check with our technical support to determine which relay you need.

Overview

  • .57 Cubic Feet
  • 2 Years Warranty
  • Double Insulated Wall
  • Kanthal A-1 Elements
  • 120 Volts
  • 18 Amps
  • 20 Amp Breaker Required
  • Bartlett Controller

High alumina kiln furniture which can be fired up to cone 11.

Two 15.5″ dia. full shelves.

Three each 1″,2″4″,and 6″ posts.

Two kgs. kiln wash.

Overview

  • 2309G SQ – 2.3 Cubic ft
  • 208 or 240 Volts
  • 40 Amp breaker required
  • Kanthal A-1 elements in lid and walls
  • CSA approved

These are cut and grooved K-23 Insulating Fire Bricks.They are available in 2.5″ and 3″.
If you require replacement bricks we will need to know the model and serial number of your kiln and the exact placement of the brick.

Overview

  • 10 cubic feet
  • Double wall construction
  • Kanthal A-1 Elements
  • 208 or 240 volts
  • 80 or 90 Amp Breaker required
  • 3 Zone Bartlett Controller at NO EXTRA CHARGE
  • New Lid Lifter at NO EXTRA CHARGE