Kiln Wash
Kiln Wash is used to protect kiln shelves from glaze drips and pottery from sticking to the shelves.
It comes as a powder which you mix with water to a milky consistancy.Apply it to the top side of kiln shelves with a brush.
It is better to apply several thin layers than one thick layer.
Please do not apply kiln wash to the bricks of your kiln.
If you require kiln wash for glass slumping please specify.
Related Products
High alumina furniture which can be fired up to cone 11.
One 10″ dia. shelf
Three 1″ posts
One kg. kiln wash
This is high alumina kiln furniture rated to cone 11.
Two 21x21x3/4″ square shelves
Two 21×10-1/2×3/4″ shelves
Three each 1″, 2″, 4″, 6″ and 8″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.
High alumina furniture rated to cone 11.
Three 10.5″ X 21″ rectangular shelves
Six 21″ diameter half shelves
Nine each 1″,2″,4″,6″,and 8″ posts
Two kilograms kiln wash.
The posts are 1 3/4″ square.
This is high alumina kiln furniture that is rated to cone 11.
Three 21″ diameter full shelves.
Two 21″ diameter half shelves
Three each 1″,2″,6″ and 8″ posts
Six 4″ posts.
Two kilograms kiln wash
All posts are 1 3/4″ square
This is high alumina kiln furniture rated for cone 11.
Six 26″ diameter half shelves.
Four each 1″, 2″, 4″, 6″, 8″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.
These kiln posts are rated up to cone 11 in oxidation or reduction atmospheres.
We suggest using three posts per shelf for stability.
Always try to stack each layer of posts directly above each other so that the weight of all shelves rests on the kiln floor and not on the shelf below.
These posts are all 1 3/4″ X 1 3/4″ square and are available in the following sizes;
1/2″
1″
2″
3″
4″
5″
6″
8″
10″
12″