- Home
- >
- Replacement Parts
- >
- Infinite Switch
Infinite Switch
These infinite switches are used on kilns without a Bartlett controller to control rate of temperature rise in the kiln.
Related Products
A wiring harness is the complete set of wires and connectors in your control panel.
If you require a set we will need to know the model and serial number of your kiln.
Specify voltage when ordering.Relays are available in12 volt,208 volt or 240 volt.
The most common relay on a kiln with an electronic controller is the 12 volt version.Please check with our technical support to determine which relay you need.
This copper connector and stainless steel set screw are used to attach the tail of the element to the wires in the control panel.
This terminal block is CSA/CUL approved for use as a connecting block for the main power input up to 90 amps.
These are cut and grooved K-23 Insulating Fire Bricks.They are available in 2.5″ and 3″.
If you require replacement bricks we will need to know the model and serial number of your kiln and the exact placement of the brick.