Top Rated
This kit extends the distance between the blower motor and the collector cup. The kit includes 1 additional three foot high-temperature hose, a hose coupler, and two hose clamps. This kit is excellent for mounting the vent higher on a wall or further away from the kiln. (Maximum recommended length between collector cup and motor blower is 25 feet)
This copper connector and stainless steel set screw are used to attach the tail of the element to the wires in the control panel.
These kiln shelves are made from a refractory mix that is high in alumina.
They are rated for use up to cone 11 in oxidation or reduction atmospheres.
We suggest using three posts per shelf for optimum stability.
If we do not stock the size that you need please request a quotation.
We can cut shelves at a cost of $4.00 per cut.
Stock sizes are;
10″ x 1/2″ full round
13″ x 1/2″ full round
15 1/2″ x 5/8″ full round
15 1/2″ x 5/8 ” half round
21″ x 3/4″ full round
21″ x 3/4″ half round
26″ x 3/4″ full round
26 ” x 3/4″ half round
21″ x 10 1/2″ x 3/4 rectangle
26″ x 13″ X 3/4″ rectangle
This is high alumina kiln furniture rated to cone 11.
Two 21x21x3/4″ square shelves
Two 21×10-1/2×3/4″ shelves
Three each 1″, 2″, 4″, 6″ and 8″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.
The pilot light is on some older models to let you know when the elements were on.
High alumina furniture which can be fired up to cone 11.
One 10″ dia. shelf
Three 1″ posts
One kg. kiln wash
