Furniture Kit for 2818 model kilns
This is high alumina kiln furniture rated for cone 11.
Six 26″ diameter half shelves.
Four each 1″, 2″, 4″, 6″, 8″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.
Related Products
High alumina furniture which can be fired up to cone 11.
One 10″ dia. shelf
Three 1″ posts
One kg. kiln wash
This is high alumina kiln furniture rated to cone 11.
Eight 26″ half Full Shelves
Six each 1″, 2″, 4″, 6″ and 8″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.
This is high alumina kiln furniture rated to cone 11.
Three 21x21x3/4″ square shelves
Two 21×10-1/2×3/4″ shelves
Three each 1″, 2″, 6″ and 8″ posts.
Six each 4″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.
Kiln Wash is used to protect kiln shelves from glaze drips and pottery from sticking to the shelves.
It comes as a powder which you mix with water to a milky consistancy.Apply it to the top side of kiln shelves with a brush.
It is better to apply several thin layers than one thick layer.
Please do not apply kiln wash to the bricks of your kiln.
If you require kiln wash for glass slumping please specify.
These kiln posts are rated up to cone 11 in oxidation or reduction atmospheres.
We suggest using three posts per shelf for stability.
Always try to stack each layer of posts directly above each other so that the weight of all shelves rests on the kiln floor and not on the shelf below.
These posts are all 1 3/4″ X 1 3/4″ square and are available in the following sizes;
1/2″
1″
2″
3″
4″
5″
6″
8″
10″
12″
This is high alumina kiln furniture rated to cone 11.
Two 21x21x3/4″ square shelves
Two 21×10-1/2×3/4″ shelves
Three each 1″, 2″, 4″, 6″ and 8″ posts.
All posts are 1 3/4″ square.
Two kilograms kiln wash.